If you have purchased a Premium Plus Hen House with Yard by Ware Mfg. and have
misplaced the assembly instructions this post should help get back on
track. If you have had your Hen House for a while and you need replacement parts we can help critter-cages.com
carries parts for this item. If you do not see a part you need listed
give us a call 310 832-9981 M-F 10 am to 6 pm Pacific Time or drop us an
email at orderdesk@critter-cages.com
and we will check on availability. We also stock lots of toys, treats
and equipment for all your Bunny Buddies and other critters to!
*Please note the Hutch is shown with the optional Premium Plus Universal Nest Box The Nest box attaches to the back Panel of the Hutch by removing the "pop-out" that is located on the back Panel.
*To keep your new Hutch in tiptop condition we suggest re-staining every year with a non-toxic water based stain.
Assembling Your Premium Plus Hen House
Before you start assembling your new Hen House it is a good idea to lay out all the parts and make sure they are all there. The Parts List below will help you check.Step 1
Connect the Hutch Front panel and the Hutch Back Panel to the Side Panels using 8 of the 1-3/4 inch screws (A)Step 2
Insert the two piece Floor Panels into the assembled Hutch Body and place the Support Bar in the center. Position the Indoor Roost Bar underneathStep 3
Attach the Hutch Roof to the assembled Hutch by sliding the two hinge parts together as showen. Attach the locking roof supports on both sides using 8 of the 2/4 inch screws (C).Step 4
Attach the Pen Side Panels to the Pen front using 4 of the 1-3/4 inch screws (A). Attach the upper Roost in the Pen.Step 5
Attach the Pen Roof to the assembled Pen using two of the 1-3/4 inch screws (B)Step 6
Attach The assembled Pen to the assembled Hutch with 4 of the 1-3/4 inch screws (A). Attach the Ladder to the Door inside the Pen by hooking the two ladder hooks onto the two eye hooks on the door fame.Assembled
You are ready to go, just add your feathered friends.*Please note the Hutch is shown with the optional Premium Plus Universal Nest Box The Nest box attaches to the back Panel of the Hutch by removing the "pop-out" that is located on the back Panel.
*To keep your new Hutch in tiptop condition we suggest re-staining every year with a non-toxic water based stain.
Other Small Critter, Chicken, and Poultry Products
If you are looking for other things for your Fury Friends, make sure you check out our website at http://critter-cages.com . We offer a large selection of cages, welded wire and supplies for you furry, four legged and feathered Critters. Whether you are looking for chicken runs, feeders or even chicken wire, take a look at our large selection of Poultry and other products for your Critters.
it could not have gotten more easier than this. you have laid out the whole plan for me to carry out. i am so glad that this post exists.
ReplyDelete