If you have purchased a CritterWare Backyard Charm Open Air Hutch,
from us or others and can't find your instructions or
you would like to see how easily it goes together. Just keep
reading as we lay out how to put your CritterWare Backyard Charm Open Air Hutch together. If you are
actually looking for replacement parts for your Hutch, we have them available at Critter-Cages.com
To Keep your hutch in tip top shape we suggest that you re-stain all the wood surfaces every year using a safe non-toxic water based stain (available at your local hardware store).
Always place you hutch in a sheltered area protected from temperature extremes and high winds.
If you would like to print these instructions out in a PDF format please click here.
Make sure you have all the parts as laid out below:
Check that you have everything together. If you find a part is
missing,
please call Ware Mfg. customer service department at 1 800 295-2243 M-F
8am to 4pm MST they will take care of any missing parts issues.
To Keep your hutch in tip top shape we suggest that you re-stain all the wood surfaces every year using a safe non-toxic water based stain (available at your local hardware store).
Always place you hutch in a sheltered area protected from temperature extremes and high winds.
If you would like to print these instructions out in a PDF format please click here.
Assembling your Backyard Charm Open Air Hutch
First, you will need a Phillips Screwdriver (power driver makes the job much faster), you may also want to have another person to help hold the parts in place while you assemble. The beauty of this product is you only need one tool to put it all together, a Phillips Screwdriver.Make sure you have all the parts as laid out below:
Assembly Step 1
Assemble the run portion by attaching the Pen door to the upper and lower mesh side panels using 12 of the 2" Screws (A). Secure Top Panels with 1 of the 1-3/8" Screws (B).Assembly Step 2
Assemble the wood portion of the Hutch by attaching the Pen Nest Box Panel to the Lower Mesh Side Panel, the Rooftop Right, the Lower Wood, the Mesh Side Panel, and the Inside Wall using 10 of the 2" Screws (A).Assembly Step 3
Connect the run portion that you have already assembled to the wood portion using 6 of the 2" Screws (A).
Assembly Step 4
Assemble the Nest Box Front and Side Panels with 4 of the 1-3/8" Screws (B). Attach to the Hutch assembly using 4 of the Nuts & Bolts (E). Slide the Nest Box Floor into place. Slide the Nest Box Divider down into position.
Assembly Step 5
Place the Floor Support Beam tint the notches on the base of the run. Slide the Pull Pan into the wooden section of the Hutch. Lower the 3 Roosts into the Hutch area and place in slots on the Hutch walls.
Assembly Step 6
Secure Nest Box Roof Panel onto Nest Box with 4 of the 3/4" Screws (D). Place the Ladder inside the run and attach with hooks and eyes.
Assembly Step 7
Attach the Short Ridge Cap on the top of the wooden Hutch Section with 2 of the 1" Screws (C).
Attach the Long Ridge Cap on top of the Run Section wit 6 of the 1" Screws (C). Slide the hinged Rooftop Left Panel onto the Hutch assembly.
Assembly Step 8
Attach the 4 Handles using 4 of the 1" Screws (C) for each handle.
If you need this in PDF form, you can download the instruction manual from our website at:
Other Chicken and Poultry Products
If you are looking for other things for your pampered Poultry, make sure you check out our website at http://critter-cages.com . Whether you are looking for chicken runs, feeders or even chicken wire, take a look at our large selection. We also offer a large selection of cages and supplies for you furry, four legged Critters.
nice
ReplyDelete