ChickenWare Little Red Hen Barn by Ware Mfg. Assembly Instructions

If you have purchased a ChickenWare Little Red Hen Barn Hutch , from us or others and can't find your instructions or you would like to see how easily it goes together before you buy. This Coop is suitable for 2 to 4 average size Hens. Just keep reading as we lay out how to put your ChickenWare Little Red Hen Barn together. If you are actually looking for replacement parts for this Hutch, we have them available at Critter-Cages.com
To Keep your hutch in tip top shape we suggest that you re-stain all the wood surfaces every year using a  safe non-toxic water based stain (available at your local hardware store).

Always place you hutch in a sheltered area protected from temperature extremes and high winds.

Assembling your Little Red Hen Barn & Pen

First, you will need a Phillips Screwdriver (power driver makes the job much faster), you may also want to have another person to help hold the parts in place while you assemble. The beauty of this product is you only need one tool to put it all together, a Phillips Screwdriver.

Make sure you have all the parts as laid out below:

Check that you have everything together. If you find a part is missing, please call Ware Mfg. customer service department at 1 800 295-2243 M-F 8am to 4pm MST they will take care of any missing parts issues.

Step 1

Connect the Front, Back, Left, and Right Side Hutch Panels using 8 of the 2" Screws (A). Next lower the 4 Roosts into the Hutch assembly.

 Step 2

Attach the Rooftop Panels using 8 of the 1" Screws (B) to the Hutch Body assembly. Attach the Ridge Cap using 4 of the 1" Screws (D).

Step 3

Assemble the Gable by attaching the 2 Gable Walls to the Gable Window panel using 4 of the 1" (E). Secure the Gable to the Hutch Roof using 4 of the 1-1/2" (C) Screws to attach the Gable Walls to the Rooftop.

Step 4

Attach the Gable Roof Panels to the Gabble Window panel using 2 of the 1" Screws (E). Slide the Pull Pan into the bottom of the Hutch body.

Step 5

Attach gable Ridge Cap to the Gable Roof assembly using 4 of the 1" Screws (E). Place the Nest Box Divider into the Nest Box and place the Nest Box inside the Hutch assembly.

Step 6

Make sure you have all the parts as laid out below for your Little Red Barn Pen:

Step 1

Connect the three Pen Panels and the Baseboard using 6 of the 1" Screws (F).

 Step 2

Secure the Pen Rooftop Panel using 4 of the 1" Screws (F).

Step 3

Attach The locking Latches to each side of the Hutch and Pen assembly using 4 of the 2" Screws (A) for each Latch assembly. Latch the Pen to the Hutch to complete the assembly.
*Please note disconnect Pen from the Hutch before attempting to move your Hutch.*

Other Chicken, Poultry and Small Critter Products

If you are looking for other things for your pampered Poultry, make sure you check out our website at http://critter-cages.com . Whether you are looking for chicken runs, feeders or even chicken wire, take a look at our large selection. We also offer a large selection of cages and supplies for you furry, four legged Critters.