Connectable Rabbit Habitat Assembly Instructions

 The Connectable Rabbit Habitat is a PetsMart exclusive at this time (9/15) and is available only from them at this time. The Connectable Rabbit Habitat is a recommended habitat for Smaller Breeds of Rabbits, Chinchillas and other small critters The Connectable Rabbit Habitat is expandable two units may be joined together to give your critters a larger Habitat. If you have purchased a Connectable Rabbit Habitat these instructions should make assembly a snap, no tools are required.

Need parts, we may be able to help www.critter-cages.com
Manufactured by Ware Mfg. Inc. 
If you need a part drop us a note and we will check on availability.
email orderdesk@critter-cages.com
Phone 310 832-9981 M-F 10am to 6pm Pacific Time.

First unpack your cage and using the parts list below check that all parts are there.Then proceed to step #1.

Step 1

Place the wire body panels on a flat surface with the door facing up. Carefully unfold the front, back, and side panels.

Step 2

Lock the two side panels onto the back and front panels by snapping the four corner clips onto the wire frame.

 

 Step 3

Place the shelf /ramp/hideout combo in place on the plastic base. Line up the slots on the edges of the shelf with the tabs on the base for a secure fit.

Step 4

Pick up the cage top and set it onto the plastic base. Snap the tabs on the corner clips into the base cornet to secure.

Step 5

Attach the side clips to each corner of the cage, Insert the clip sideways in the gap on the corner of the wire. Turn the clip 90 degrees and then bend down as shown in the pictures below, to attach the two sides of the cage.

Step 6

Use the two cage clips on each end of the Habitat to lock the wire cage body to the Base.

Step 7

Open the door on top of the cage and hang the Hay Feeder from the two lengthwise wires on either side of the cage door.

Step 8

Attach the Water Bottle to the cage wire with the spring retainer. Be sure to locate the water bottle in a position that is easy for your critter to access.  

Your Connectable Rabbit Habitat is ready for your critter to move in and set-up housekeeping.

 

Step 9 

This step is optional and will describe how to expand your critters habitat.

To attach two cages side by side, first open the side doors as shown (image 1). Remove two clips from each cage. hook the looped end of the two cage top connector clips to the top wire of the cage on the left side, one on each side of the door. Press the other end of the clip down on the wire of the cage on the right side to fasten (image 2). Secure by placing the three cage connectors over the edges of the side doors, starting with the bottom edge (small connectors), then the sides (large connectors)(image 3)                                       

 For Other Small Critter, Chicken, and Poultry Products

If you are looking for other things for your Fury Friends, make sure you check out our website at http://critter-cages.com . We offer a large selection of cages, welded wire and supplies for you furry, four legged and feathered Critters. Whether you are looking for Chicken Runs, Cages for your Critters, Feeders or even chicken wire, take a look at our large selection of Poultry and other products for your Critters.