If you have purchased a Premium Plus Chick-N-Cottage (Model 14060) by Ware Mfg. and have misplaced the assembly instructions this post should help get back on track. If you have had your Chick-N-Cottage for a while and you need replacement parts we can help: critter-cages.com carries parts for this item. If you do not see a part you need listed give us a call 310 832-9981 M-F 10 am to 6 pm Pacific Time or drop us an email at orderdesk@critter-cages.com and we will check on availability. We also stock lots of toys, treats and equipment for all your Furry Friends.
Parts
Replacement Ladder #901160
Parts list changes frequently. Please visit our website, call or email us using the information above if what you need isn't currently listed.
Parts
Replacement Ladder #901160
Parts list changes frequently. Please visit our website, call or email us using the information above if what you need isn't currently listed.
Putting your Chick-N-Cottage Together
Before you start assembling your new Chick-N-Cottage, it is a good idea to lay out all the parts and make sure they are all there. The graphic below will help you check. Assembly is easy, just follow the instructions, its a Snap. If you find there are parts missing contact the manufacturer's customer service department at 800 295-2243.
Step 1
Connect the Front Panel to the Wooden Left Panel and the Mesh Right Panel using 4 - 1¾" screws (A). Attach the Inside Wall to the center of the Front Panel with 2 - 1¾" screws (A).
Step 2
Attach the Back Panel to assembled hutch using 6 - 1¾" screws (A).
Step 3
Attach the Inside Roost above the floor in the hutch. Place the two floor panels in place inside. Insert Roof Support bar into the hutch.
Step 4
Attach the Roof Right piece onto the top of the pen using 2 - 1" screws (B). Attach the two Outdoor Roosts inside the pen.
Attach the Ladder to the door inside the pen by hooking the two ladder hooks onto the two eye hooks on the door.
Attach the Ladder to the door inside the pen by hooking the two ladder hooks onto the two eye hooks on the door.
Step 5
Attach Roof Left piece by sliding the two hinge parts together as shown, then secure with 2 - 1" screws (C). Attach the locking Roof Support using 4 - 1" screws (D).
Final Product
Your Chick-N-Cottage is assembled! TIP: The nesting box door can be removed to allow addition of the Ware Premium Plus Universal Chicken Nesting Box (Item #01475).
Care Tip
To protect the wood on your hutch you need to re-apply the protective stain finish at least 1x each year. Use a safe and non-toxic water based stain (available at your local paint or hardware center). Keep hutch in a safe area away from high winds and extreme temperatures.
For Other Small Critter, Chicken, and Poultry Products
If you are looking for other things for your Fury Friends, make sure you check out our website at http://critter-cages.com . We offer a large selection of cages, welded wire and supplies for your furry, four legged and feathered Critters. Whether you are looking for Chicken Runs, Cages for your Critters, Feeders or even chicken wire, take a look at our large selection of Poultry and other products for your Critters.
Comments
Post a Comment