Premium Plus Hen Hut with Yard (14062) by Ware Mfg. Assembly Instructions

If you have purchased a Premium Plus Hen Hut with Yard (Model 14062) by Ware Mfg. and have misplaced the assembly instructions this post should help get back on track. If you have had your Hen Hut for a while and you need replacement parts we can help: critter-cages.com carries parts for this item. If you do not see a part you need listed give us a call 310 832-9981 M-F 10 am to 6 pm Pacific Time or drop us an email at orderdesk@critter-cages.com and we will check on availability.  We also stock lots of toys, treats and equipment for all your Furry Friends.


Parts list changes frequently. Please visit our website, call or email us using the information above if what you need isn't currently listed.

Putting your Premium Plus Hen Hut with Yard Together

Before you start assembling your new Hen Hut, it is a good idea to lay out all the parts and make sure they are all there.  The graphic below will help you check.  Assembly is easy, just follow the instructions, its a Snap. If you find there are parts missing contact the manufacturer's customer service department at 800 295-2243.

Step 1

Connect the Front Panel and the Back Panel to the Side Panels using eight 2 3/8" Bolts & Nuts (A). Insert the two piece Floor Panel into the assembled Hutch. Position the Indoor Roost inside.

Step 2

Attach roof to assembled Hutch by sliding the two hinge parts together as shown inside. Secure with two 1" screws (C). Attach the locking Roof Support using four 5/8" screws (D). Place the Removable Nesting Box Door in place on the Back Panel and lock the latch to close. TIP: This Door can be removed to allow addition of the Ware Premium Plus Universal Chicken Nesting Box (Item #01475).

Step 3

Attach the Right Side Pen Wall and the Left Side Pen Wall to the front of the Hutch and attach the Front Pen Wall using eight 1 3/4" screws (B). Attach the Outdoor Roost to the side pen walls.

Step 4

Attach the Hinged Pen Roof to the assembled pen using two 1 3/4" screws (B). Close Latch to secure the top of the pen.

Care Tip

To protect the wood on your hutch, you need to re-apply the protective stain finish at least once each year. Use a safe and non-toxic water based stain (available at your local paint or hardware center). Keep hutch in a safe area away from high winds and extreme temperatures.

For Other Small Critter, Chicken, and Poultry Products

If you are looking for other things for your Fury Friends, make sure you check out our website at http://critter-cages.com . We offer a large selection of cages, welded wire and supplies for your furry, four legged and feathered Critters. Whether you are looking for Chicken Runs, Cages for your Critters, Feeders or even chicken wire, take a look at our large selection of Poultry and other products for your Critters.