Clean Living Cage 2.0 (16017) by Ware Mfg. Assembly Instructions

If you have purchased a Clean Living Cage 2.0 (Model 16017) by Ware Mfg. and have misplaced the assembly instructions this post should help get back on track. If you have had your Clean Living Cage for a while and you need replacement parts we can help: critter-cages.com carries parts for this item. If you do not see a part you need listed give us a call 310 832-9981 M-F 10 am to 6 pm Pacific Time or drop us an email at orderdesk@critter-cages.com and we will check on availability.  We also stock lots of toys, treats and equipment for all your Furry Friends.

Parts
Replacement Ramp #901538
Replacement ScatterShield Sides #901357
Replacement ScatterShield Front/Back #901356

Parts list changes frequently. Please visit our website, call or email us using the information above if what you need isn't currently listed.

Putting your Clean Living Cage 2.0 Together

Before you start assembling your new Clean Living Cage, it is a good idea to lay out all the parts and make sure they are all there.  The graphic below will help you check.  Assembly is easy, just follow the instructions, its a Snap. If you find there are parts missing contact the manufacturer's customer service department at 800 295-2243.

Step 1

Insert 4 Wheels into the bottom of the Plastic Base. Tip: Place the two locking wheels towards the front of the cage.

Step 2

Unfold the Wire Set and place inside notches in plastic base. Slide Pull-out Tray into the bottom of the base. Door should be positioned above Pull-out Tray.

Step 3

Attach Clips to right and left sides of wire and snap lock onto Plastic Base.

Step 4

Snap together Scatter-Shield panels. Slide assembled ScatterShield down the outside of the Wire Set and insert into notches on the base.

Step 5

Attach Ramp to the hooks on the bottom of the Shelf.

Step 6

Using 5 Shelf Knobs, attach Shelf to the 2nd bar from the bottom on the left side of the Wire Set.

Step 7

Rest Roof on top of Wire Set. Press down on the right side of the Roof while pulling on the right side of Wire Set to attach left-center Roof hook. Repeat for the left side of the Roof. Press down on front center of Roof while pulling on the front of the Wire Set to attach back-center Roof hook. Repeat for front.

For Other Small Critter, Chicken, and Poultry Products

If you are looking for other things for your Fury Friends, make sure you check out our website at http://critter-cages.com . We offer a large selection of cages, welded wire and supplies for your furry, four legged and feathered Critters. Whether you are looking for Chicken Runs, Cages for your Critters, Feeders or even chicken wire, take a look at our large selection of Poultry and other products for your Critters.