Premium Plus Slant Roof Doghouses, by Ware Mfg., are available in three sizes small(01700), medium(01701), and large(01702) and are recommended houses for your canine companion. If you have purchased a Premium Plus Slant Roof Doghouse in any of the above sizes, and have misplaced the assembly instructions this post should help get back on track. If you have had your Doghouse for a while and you need replacement parts we can help: critter-cages.com carries parts for this item. If you do not see a part you need listed give us a call 310 832-9981 M-F 10 am to 6 pm Pacific Time or drop us an email at orderdesk@critter-cages.com and we will check on availability. We also stock lots of toys, treats and equipment for all your Furry Friends.
Parts
Replacement Feet: (All)#900102
Replacement Front Panel: (Large)#900963
Replacement Center Floor Panel: (Large)#900965
Replacement Roof: (Small)#900952 (Large)#900968
Parts list changes frequently. Please visit our website, call or email us using the information above if what you need isn't currently listed.
Ware Tip:
Parts
Replacement Feet: (All)#900102
Replacement Front Panel: (Large)#900963
Replacement Center Floor Panel: (Large)#900965
Replacement Roof: (Small)#900952 (Large)#900968
Parts list changes frequently. Please visit our website, call or email us using the information above if what you need isn't currently listed.
Putting your Premium Plus Slant Roof Doghouse Together
Before you start assembling your new Premium Plus Slant Roof Doghouse, it is a good idea to lay out all the parts and make sure they are all there. The graphic below will help you check. Assembly is easy, just follow the instructions, its a Snap. If you find there are parts missing contact the manufacturer's customer service department at 800 295-2243.
 |
| SMALL |
 |
| MEDIUM |
 |
| LARGE |
Step 1
Connect the Front Panel and the Back Panel to the Left Side Panel and Right Side Panel using 8 (12 if Large) - 2 3/8" bolts and nuts.
 |
| SMALL & MEDIUM |
 |
| LARGE |
Step 2
Insert the three piece Floor Panel into the assembled doghouse. Hint: The corners of the two end pieces are notched to fit into the corners of the doghouse. The center piece does not have notches.
Step 3
Attach the two piece Shingle Roof Panels to the assembled doghouse using 4 - 1" screws. Next, attach locking opener on right side using 4 - 3/4" screws.
Step 4
(A) Push back gently on locking closure and fold rooftop closed.
(B) Attach 3 star shaped bolts on dog door frame in threaded holes.
Ware Tip:
Your Premium Plus Doghouse has four adjustable feet, designed to allow you to level your doghouse.
Care Tip:
To protect the wood on your doghouse you need to re-apply the protective stain finish at least 1x each year. Use a safe and non-toxic water based stain (available at your local paint or hardware center). Keep in a safe area away from high winds and extreme temperatures.
To protect the wood on your doghouse you need to re-apply the protective stain finish at least 1x each year. Use a safe and non-toxic water based stain (available at your local paint or hardware center). Keep in a safe area away from high winds and extreme temperatures.
For Other Small Critter, Chicken, and Poultry Products
If you are looking for other things for your Fury Friends, make sure you check out our website at http://critter-cages.com . We offer a large selection of cages, welded wire and supplies for your furry, four legged and feathered Critters. Whether you are looking for Chicken Runs, Cages for your Critters, Feeders or even chicken wire, take a look at our large selection of Poultry and other products for your Critters.
Comments
Post a Comment