Animal House Series 35" Pet Studio Home (16003) by Ware Mfg. Assembly Instructions

If you have purchased an Animal House Series 35" Pet Studio Home (Model 16003) by Ware Mfg. and have misplaced the assembly instructions this post should help get back on track. If you have had your Pet Studio Home for a while and you need replacement parts we can help: critter-cages.com carries parts for this item. If you do not see a part you need listed give us a call 310 832-9981 M-F 10 am to 6 pm Pacific Time or drop us an email at orderdesk@critter-cages.com and we will check on availability.  We also stock lots of toys, treats and equipment for all your Furry Friends.

Parts
Replacement Shelf 900909
Replacement Plastic Tray 900903
Replacement Wire Latches 900912
Replacement Stair Step Ramp 900910
Replacement Wire Panels Assembly 900904

Parts list changes frequently. Please visit our website, call or email us using the information above if what you need isn't currently listed.

Putting your Animal House Series Pet Studio Home Together

Before you start assembling your new Animal House Series Pet Studio Home, it is a good idea to lay out all the parts and make sure they are all there.  The graphic below will help you check.  Assembly is easy, just follow the instructions, its a Snap. If you find there are parts missing contact the manufacturer's customer service department at 800 295-2243.

Step 1

Unfold Wire Panels Assembly and place in on plastic tray so that it rests in the grooves of the base. Lock the wire set onto the base of the cage by pressing down on the wire latches on both sides of the plastic base. OPTION: Insert Caster Wheels on bottom of plastic base by pressing down firmly.

Step 2

Attach the Stair Step Ramp to the Shelf by snapping in place into the two notches on the underside of the shelf. 

Step 3

Place the Shelf with attached Ramp into the cage and snap the shelf down onto the wire on the first horizontal wire up from the bottom on the left hand side of the cage. Press down firmly so that shelf locks in place.

Step 4

Place the Chair Shaped Food Dish inside the cage and lock in place on the shelf.

Step 5

Place the Rooftop on top of the Wire Panels Assembly and lock the wires in place into the tabs around the Rooftop. TIP: Gently bend the wires until they snap into place on the Rooftop.

For Other Small Critter, Chicken, and Poultry Products

If you are looking for other things for your Fury Friends, make sure you check out our website at http://critter-cages.com . We offer a large selection of cages, welded wire and supplies for your furry, four legged and feathered Critters. Whether you are looking for Chicken Runs, Cages for your Critters, Feeders or even chicken wire, take a look at our large selection of Poultry and other products for your Critters.