Evergreen Chicken Ranch by Ware Mfg. Assembly Instructions

Evergreen Chicken Ranch by Ware Mfg. Assembly Instructions

If you have purchased an Evergreen Chicken Ranch , from us or others and can't find your instructions or you would like to see how easily it goes together before you buy. The Ranch is a great value priced Coop for up to 5 or 6 Hens. The Evergreen Ranch features two Roosts, Ladder, and Easy Access Doors.  Just keep reading as we lay out how to put your Evergreen Ranch together. If you are actually looking for replacement parts for this Hutch, we may have them available at Critter-Cages.com
To Keep your Coop in tip top shape we suggest that you re-stain all the wood surfaces every year using a  safe non-toxic water based stain (available at your local hardware store).

Always place you hutch in a sheltered area protected from temperature extremes and high winds.

Assembling your Evergreen Chicken Ranch

First, you will need a Phillips Screwdriver (power driver makes the job much faster), you may also want to have another person to help hold the parts in place while you assemble. The beauty of this product is you only need one tool to put it all together, a Phillips Screwdriver.

If you would like to print these instructions out in a PDF format please click here.

Make sure you have all the parts as laid out below:

 Step 1

Connect the front Panel to the Left End Panel and the Mesh Right End Panel Using 4 of the 1-3/4" Screws (A).  Attach the Inside Wall to the center of the front panel with 2 1-3/4" Screws (A).

Step 2

Attach the Back Panel ato the already assembled Hutch Body using 6 of the 1-3/4" Screws (A). 

 

Step 3

Attach the two Roosts to the mesh side walls of the Hutch. Place the two floor panels in place in the "house" part of the Coop.

Step 4

Screw the two Eye Screws (D) in below the door of the inside panel so that the ladder may be attached. Attach the two ladder hooks onto the tow eye hooks on the door.

 

Step 5

Attach the right Roof Panel and the left Roof Panel onto the top of the assembled Coop using 6 of the 1-3/8" Screws (B). Attach the Roof Support Bar using 4 of the 1-1/8" Screws (C).

Step 6

YOU ARE DONE, your Evergreen Chicken Cottage is assembled.

Other Small Critter, Chicken, and Poultry Products

If you are looking for other things for your Fury Friends, make sure you check out our website at http://critter-cages.com . We offer a large selection of cages, welded wire and supplies for you furry, four legged and feathered Critters. Whether you are looking for chicken runs, feeders or even chicken wire, take a look at our large selection of Poultry and other products for your Critters.